GÉNÉRALE DE PEINTURE

70 rue Cortambert - 75116 - Paris (France)

Ph. + 33 (0)1 75 29 35 59 - www.generalpaint.fr

LT 1.000   

R.0645 R 0645

5E.1.K1 - ACRYLIC 2K GLOSS

DANGER Flammable liquid and vapour. - Causes skin irritation. - May cause an allergic skin reaction. - Causes serious eye irritation. - May cause allergy or asthma symptoms or breathing difficulties if inhaled. - May cause respiratory irritation. - May cause cancer. - May damage fertility or the unborn child. - May cause damage to organs through prolonged or repeated exposure. - Toxic to aquatic life with long lasting effects.

Obtain special instructions before use. - Do not handle until all safety precautions have been read and understood. - Keep away from heat/sparks/open flames/hot surfaces. — No smoking. - Do not breathe dust/fume/gas/mist/vapours/spray. - Avoid breathing dust/fume/gas/mist/vapours/spray. - Wear protective gloves/protective clothing/eye protection/face protection. - Wear respiratory protection. - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. - IF exposed or concerned: Get medical advice/attention. - If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. - In case of fire, use a dry powder fire extinguisher for extinction.

Contains lead. Should not be used on surfaces liable to be chewed or sucked by children. - For professional use only. - REACH/16/3/0; REACH/16/3/1; REACH/16/3/2; REACH/16/3/6; REACH/16/3/7; REACH/16/3/8;

Contains: YELLOW LEAD SULFOCHROMATE; LEAD RED CHROMATE MOLYBDATE SULPHATE; XYLENE; SOLVENT NAPHTHA (PETROLEUM), LIGHT AROM

Contains: Hydroxyphenyl-benzotriazole derivatives; reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate
May produce an allergic reaction

PRODUCT FOR PROFESSIONAL USE ONLY

CATALYSIS 50% BY WEIGHT WITH 0A.H1

 

CATEGORY: Special finishes

VOC LIMIT: 840 g/l

VOC READY TO USE: 530 g/l

2004/42/CE


Data Dealer

Warning  WARNING

Browser Test

Extra Instructions:

  1. Make sure the printer and the format (A4) are correct
  2. From Page Settings, put the margins to 2 mm and remove each header and footer print
  3. From Print Preview, set resize to 95%
  4. Print